Technical Bulletins

Western Maryland Ry. Shay #6 Technical Data Handbook List of all Lima drawings
LocoGear Technical Bulletin - 01 Turning Instructions for Wheel Casting Lima Card Number 953-A-5014
LocoGear Technical Bulletin - 02 Machining Instructions for Line & Crank Shaft Couplings Including Special Boring Fixture Lima Card Number 742-C-5461
LocGear Technical Bulletin - 04 Machining Instructions for Truck Center Plates Lima Card Number 932-AB-5221
LocoGear Technical Bulletin - 05 Drawing Lists for WM #6 SN 3354 & GC&E #12 SN 3156
LocoGear Technical Bulletin - 06 Fabricating Instructions for Tender Frame End Casting - 853-B-5005
LocoGear Technical Bulletin - 09 Lima Drawing Card Numbering System
Technical Bulletin - 10 Frequently Asked Questions
LocopGear Technical Bulletin - 11 Fabricating Instructions for Furnace Bearer - Front - 483-A-5070 , Furnace Bearer - Rear - 483-A-5069, Furnace Bearer Plate - 482-A-5216, and Engine Frame Reinforcements - 488-A-5072 and 488-A-5073
LocoGear Technical Bulletin - 12 Published Information Resources
LocoGear Technical Bulletin - 13 An Introduction to the Pacific Coast Shays Class 3-PC-13 and Class 3-PC-15 and a List of All Known Prototype Drawings
LocoGear Technical Bulletin - 14 Machining and Fabricating Instructions for the Tender Water Tank Funnel Lima Card Number 882-A-5011
LocoGear Technical Bulletin - 15 Fabricating Instructions for the Whistle Rigging Arrangement Lima Card Number 963-A-5002 , and Whistle Shaft Brackets Lima Card Number 962-AB-5022
LocoGear Technical Bulletin - 16 Fabricating Instructions for Cab Lima Card Number 227-A-5003, and Fuel Bunker Lima Card Number 837-A-5000
LocoGear Technical Bulletin - 19 Machining Instructions for Eccentric Straps Lima Card Number 392-A-5110